Shamba 4ft Heavy Gauge Chain Link, 11G Wire, 80×80 Mesh

Shamba 11G Galvanized Chain Link

The Shamba heavy gauge chain serves as a high-tensile security barrier for industrial, agricultural, and residential perimeters requiring enhanced durability. This 4-foot fencing material utilizes 11-gauge galvanized steel wire to provide superior resistance against physical impact and environmental corrosion. Site supervisors specify this grade for projects where standard residential mesh is insufficient for long-term containment.

Built for the Job

This fencing material is a staple for contractors securing large-scale commercial sites and farm boundaries. The 1.2-meter height is specifically chosen for medium-level containment, often used alongside barbed wire or razor wire toppers to increase the total security profile. It performs reliably in high-traffic areas where the fence might face regular contact from livestock or heavy equipment.

• Enclosing livestock paddocks and agricultural zones on commercial farms.

• Securing construction site perimeters and temporary material storage yards.

• Defining residential boundaries in areas prone to high moisture levels.

Product Highlights

Galvanized Steel Construction

The wire undergoes a hot-dip galvanization process to ensure the zinc coating penetrates every surface, preventing rust in outdoor environments where moisture and soil contact are constant.

Heavy 11-Gauge Wire

• 3.0mm diameter wire offers significantly higher tensile strength than standard 12.5G mesh.
• Resists deformation under physical pressure and is harder to cut with standard hand tools.

Standard 80×80 Mesh Aperture

• The diamond-shaped weave provides a consistent structure that distributes weight evenly across the roll.
• Allows for clear visibility while reducing wind resistance on exposed sites.

Technical Specifications

What’s Included

• 1 x Roll of 4ft 11G Heavy Gauge Chain Link (Standard Length)

On-Site & Workshop Notes

• Always use a mechanical tensioner to pull the mesh taut before securing it to the corner posts to prevent sagging.

• For timber posts, use 40mm galvanized staples; for steel or concrete posts, use 2.0mm binding wire for all attachment points.

• Store rolls vertically on a dry surface to prevent the edges from bending or catching before deployment.

• Ensure the bottom edge is slightly buried or secured with a ground tension wire to prevent animals from burrowing underneath.