Shamba 7ft Heavy Gauge Chain Link, 12.5G, 80x80mm Mesh

Shamba 7ft Galvanized Chain Link

The Shamba Heavy Gauge Chainlink provides a high-tensile perimeter solution for commercial, agricultural, and industrial site boundaries. Manufactured from hot-dipped galvanized steel wire, this fencing material withstands environmental exposure while maintaining structural integrity. It is designed for contractors requiring a 2.1-meter vertical clearance to prevent unauthorized access or contain livestock in large-scale farm installations.

Built for the Job

This fencing material is engineered for high-tension applications where standard light-gauge mesh would fail under pressure or impact. The 12.5-gauge wire diameter provides the necessary rigidity for long-distance runs between concrete or steel posts. Site supervisors typically specify this height for high-security perimeters, as the 7-foot elevation creates a significant physical barrier that is difficult to scale without specialized equipment. The wider mesh aperture makes it a cost-effective choice for large acreage where visibility and ventilation are prioritized over small-pest exclusion.

• Industrial yard security and warehouse perimeter protection.

• Agricultural boundary fencing for cattle and large livestock.

• General construction site hoarding and temporary secure zones.

Product Highlights

Heavy 12.5 Gauge Wire

The 2.5mm wire thickness ensures the mesh remains taut over time and resists sagging between intermediate line posts.

Corrosion Resistance

• Hot-dip galvanized coating prevents oxidation in humid or coastal environments.
• Uniform zinc application ensures consistent protection across all wire intersections.

Technical Specifications

What’s Included

• 1 x Roll of 7ft Heavy Gauge Galvanized Chain Link

On-Site & Workshop Notes

• Ensure intermediate posts are spaced no more than 3 meters apart to maintain optimal mesh tension.

• Use 10-gauge or 8-gauge galvanized straining wire for the top, middle, and bottom lines to prevent sagging.

• When installing on uneven terrain, bias-cut the mesh to follow the ground contour while keeping the vertical wires plumb.

• Always wear protective gloves during handling to avoid injury from the knuckle-twisted or barbed edges.