TopRoof Salama 28 Gauge Corrugated Iron Sheet, 2 Meters

TopRoof Salama Iron Sheet

The TopRoof Salama Iron Sheet serves as a high-tensile roofing solution designed for residential, agricultural, and light industrial structures. This 28-gauge steel component provides a standard thickness that balances structural rigidity with manageable weight for rapid site installation. This specific 2-meter length facilitates easy handling for single-operator transport and fits standard purlin spacing configurations on smaller outbuildings or perimeter fencing projects.

Built for the Job

Contractors specify this material for environments requiring reliable water runoff and high wind resistance. The corrugated profile increases the effective surface area of the steel. This geometry adds significant longitudinal strength, preventing sagging between supports when installed at the correct pitch. Site supervisors often utilize these 2-meter sections for temporary hoarding or permanent sheds where longer sheets would be cumbersome to maneuver. The steel substrate undergoes a rigorous coating process to prevent oxidation in high-humidity regions.

• Primary roofing for residential extensions and rural housing projects.

• Construction of durable site hoarding and secure perimeter boundaries.

• Cladding for agricultural stores, chicken coops, and external utility rooms.

Product Highlights

Corrosion Resistance

The base metal features a protective zinc or aluminum-zinc alloy coating to inhibit rust formation at cut edges.

Structural Integrity

• 28-gauge thickness maintains profile shape under moderate foot traffic during maintenance.
• Traditional S-curve corrugation optimizes water shedding and prevents pooling.
• Uniform thickness ensures consistent overlap sealing across the entire roof surface.

Technical Specifications

What’s Included

• 1 x 2-Meter 28 Gauge Salama Roofing Sheet

On-Site & Workshop Notes

• Maintain a minimum side lap of 1.5 corrugations to ensure a watertight seal in high-wind areas.

• Always use roofing screws with EPDM washers to prevent moisture ingress at the fastening points.

• Store these panels off the ground on timber dunnage and keep them covered to prevent white rust formation from trapped condensation.

• Ensure purlin spacing does not exceed 1200mm for this gauge to prevent deflection under heavy rain loads.