Standard 3 Inch Down Pipe Clip, 75mm PVC Rainwater Bracket, UV Resistant

PVC Down Pipe Clip

The Standard Down Pipe Clip provides a secure mounting solution for vertical rainwater drainage pipes on residential and commercial buildings. This fitting accommodates standard 75mm diameter conduits to ensure stability during heavy rainfall. High-grade uPVC construction offers resistance against harsh environmental factors and chemical corrosion.

Built for the Job

Rainwater systems require rigid support to prevent vibration and potential joint failure during heavy downpours. This bracket anchors the vertical run to the external wall surface with precision. Plumbers use these fittings to maintain a straight vertical alignment which prevents the pipe from bowing under the weight of water. The offset design provides sufficient clearance from the wall to allow for easy cleaning. This also prevents moisture traps against the building facade that can lead to dampness. Site supervisors recommend these for both new builds and renovation projects because they work effectively on brickwork, stone, or timber cladding. Proper installation prevents the drainage line from detaching during high winds or mechanical impact. The holder maintains a firm grip but allows for minor longitudinal movement. This movement is necessary as the material expands and contracts with temperature changes throughout the day.

• Securing 75mm rainwater downpipes to external masonry walls.

• Managing vertical pipe alignment in multi-story drainage stacks.

• Retrofitting existing gutter systems with reinforced supports.

Product Highlights

UV Stabilized uPVC

The material incorporates industrial-grade stabilizers to prevent brittleness and cracking from prolonged sun exposure.

Installation Efficiency

• Dual pre-drilled mounting holes for balanced fastening
• Snap-fit wrap-around design for rapid pipe insertion
• High-impact resistance to withstand job-site handling

Technical Specifications

What’s Included

• 1 x 75mm uPVC Downpipe Support Bracket

On-Site & Workshop Notes

• Space the supports every 1.2 to 1.5 meters to prevent pipe sagging under heavy flow.

• Use stainless steel or galvanized screws to avoid rust streaks on the building exterior.

• Ensure the wall plugs are compatible with the specific substrate like brick or concrete.

• Check the vertical plumb of the pipe before tightening the fasteners completely.

• Periodically inspect the tension of the snap-fit to ensure the conduit remains seated.