HADA Gypsum Board 12mm

HADA Gypsum Board 12mm

The HADA Gypsum Board 12mm provides a high-performance solution for internal wall partitioning and ceiling installations in commercial and residential projects. This standard 1200mm x 2400mm sheet features a non-combustible gypsum core encased in heavy-duty face paper. It serves as a versatile substrate for various decorative finishes, including paint, wallpaper, and textured coatings.

Built for the Job

Site supervisors and drywall contractors specify this thickness for its superior structural rigidity compared to thinner alternatives. It is the primary material for creating internal office partitions, residential room dividers, and high-quality suspended ceilings. The 12mm profile offers better sound insulation and impact resistance, making it suitable for high-traffic corridors and commercial spaces. The manufacturing process ensures a consistent core density that resists sagging even in humid environments when properly ventilated. This specific board is engineered to provide a flat, stable surface that minimizes the risk of cracking at the joints after the building settles.

• Drywall partitioning on galvanized steel studs or timber frames.
• Flush-jointed ceiling systems for modern interior aesthetics.
• Encasing structural columns or beams to provide a clean, fire-resistant finish.

HADA Gypsum Board 12mm Product Highlights

Core Density

The high-purity gypsum core ensures the board remains flat and resists mechanical stress during installation.

Surface Finish

• Smooth ivory paper face requires minimal skimming before final decoration.
• High bond strength between the paper liner and the core prevents delamination.

Edge Profile

Tapered edges allow for seamless jointing with scrim tape and joint filler, resulting in a completely flush wall surface.

Technical Specifications

What’s Included

• 1 x 1200mm x 2400mm x 12mm Gypsum Sheet

On-Site & Workshop Notes

• Store boards flat on a level surface in a dry environment to prevent warping or moisture absorption before installation.
• When cutting, score the face paper with a sharp utility knife and snap the core for a clean, professional break.
• Use 32mm or 35mm drywall screws for fixing to 0.5mm gauge metal studs to ensure adequate penetration and grip.
• Always stagger joints in multi-layer applications or across wall surfaces to improve structural integrity and reduce visible seams.
• A two-person lift is recommended for these sheets to avoid edge damage and personal injury on the job site.

people also view

• HADA Gypsum Board 1200mm x 2400mm x 9mm
• Standard MDF Plain Board 12mm 8ft x 4ft x
• 12mm Plain Plywood, 8ft x 4ft Sheet
• Standard Plain Chipboard 18mm 8ft x 4ft , Interior Grade
• Veneer Chipboard 18mm 8ft x 4ft