7023 Heavy Gauge PVC Ceiling
The 7023 Heavy Gauge PVC ceiling system provides a high-durability overhead finish for residential and commercial interiors. This heavy-duty panelling offers superior moisture resistance compared to standard gypsum or timber boards. It suits high-humidity environments like kitchens, bathrooms, and outdoor eaves where moisture ingress typically causes rot or sagging.
Built for the Job
Contractors select these 18-foot lengths to minimize waste and eliminate unsightly mid-span joints in large rooms. The rigid construction maintains structural integrity over long spans without excessive bowing. Professionals install these panels directly onto timber or metal brandering using standard screws or staples through the integrated nailing flange. The material requires no painting or sanding after installation, which significantly reduces labor time on site. This bundle provides coverage for approximately 11.15 square meters, making it efficient for bulk procurement for large-scale developments.
-
Installation in coastal regions where high salt content corrodes metal ceilings.
-
Retrofitting commercial office spaces requiring low-maintenance overhead surfaces.
-
Residential bathroom and kitchen ceilings exposed to consistent steam and heat.
Product Highlights
- High-Density Profile
-
The heavy-gauge wall thickness prevents warping and provides better impact resistance than standard lightweight alternatives.
- Tongue and Groove System
-
- Precision-engineered interlocking joints for a seamless appearance
- Hidden fastener design protects screws from environmental exposure
Technical Specifications
| Specification | Detail |
|---|---|
| Pattern Code | 7023 |
| Panel Length | 18 Feet (5.5m) |
| Panel Width | 10 Inches (250mm) |
| Bundle Quantity | 8 Pieces |
| Material | Heavy Gauge PVC |
| Resistance | Water, Termite, Fire Retardant |
What’s Included
-
8 x 18ft Heavy Gauge PVC Ceiling Panels (Pattern 7023)
On-Site & Workshop Notes
-
Maintain brandering or joist spacing at a maximum of 600mm to ensure flat installation of the cladding.
-
Store the bundle horizontally on a flat surface to prevent permanent bending before the boards are fixed.
-
Use a fine-toothed saw or a utility knife for clean cuts when trimming these panels to size at wall edges.
-
Wipe the surface with a damp cloth after installation to remove dust; avoid abrasive chemical cleaners.
Reviews
There are no reviews yet.