Bosch Eco for Aluminium 254mm 96T Circular Saw Blade

Bosch Eco Aluminium Saw Blade

The Bosch Eco Aluminium Blade provides a cost-effective and reliable solution for cutting non-ferrous metals, plastics, and epoxy resins on the job site. Engineered with high-grade tungsten carbide teeth, this accessory ensures clean cuts in aluminium extrusions and profiles without the high cost of premium industrial lines. It is compatible with most miter saws and table saws that accept a 254mm diameter disc, making it a versatile addition to a contractor’s kit.

Built for the Job

This hardware is designed specifically for tradespeople involved in window installation, shop fitting, and metal fabrication. When working with aluminium, heat buildup and tooth clogging are primary concerns. The tooth geometry on this disc handles these challenges by clearing chips efficiently, which prevents the material from welding to the tips. It is particularly effective for site supervisors managing large-scale installations where multiple clean cuts are required in light-gauge aluminium framing or PVC piping. The balance between speed and finish quality makes it suitable for both rough-in work and visible trim finishing.

• Cutting aluminium window and door profiles to size on site.

• Sizing plastic conduits, PVC pipes, and thick-walled epoxy materials.

• Trimming non-ferrous metal sheets and extrusions for interior finishes.

Product Highlights

HLTCG Tooth Geometry

The High-Low Triple Chip Grind configuration ensures the blade stays sharp longer while providing a burr-free finish in abrasive non-ferrous materials.

Expansion Slots

• Laser-cut slots reduce noise and vibration during high-speed operation.
• Thermal expansion gaps prevent the steel body from warping when the blade heats up during heavy use.

Tungsten Carbide Tips

High-quality carbide grain used in the teeth provides a high resistance to wear, extending the service life between replacements.

Technical Specifications

What’s Included

• 1 x Bosch Eco for Aluminium TCT Circular Saw Blade

• Reduction rings for bore compatibility

On-Site & Workshop Notes

• Always use a dedicated cutting wax or lubricant when processing aluminium to prolong the life of the carbide tips.

• Ensure the saw’s RPM does not exceed the maximum rating printed on the face of the steel body.

• Verify that the bore reduction ring is seated flush before tightening the arbor nut to prevent run-out or vibration.

• Store the cutting disc in a dry environment to prevent surface oxidation on the non-coated steel plate.