Ceramic Soap & Tissue Holder
The Trade Grade Ceramic Soap Dish provides a heavy-duty, recessed solution for high-traffic washrooms and residential bathroom installations. This vitreous china fixture integrates directly into the wall substrate to provide a flush finish that matches standard tile grids. Its high-density ceramic composition ensures long-term resistance to moisture absorption and chemical cleaners.
Built for the Job
Site supervisors and plumbers specify this recessed accessory for projects where durability and space-saving are priorities. Unlike surface-mounted metal alternatives, this ceramic component will not corrode or loosen over time when properly bedded into the masonry or cement board. It remains a standard choice for schools, hospitals, and public facilities due to its vandal-resistant nature once grouted into place. The design features a integrated soap ledge with drainage ridges and a dedicated housing for standard toilet tissue rolls.
-
Commercial washroom fit-outs requiring low-maintenance sanitary ware.
-
Residential bathroom renovations using 150mm x 150mm (6×6 inch) tile formats.
-
High-moisture environments where metal fixtures are prone to oxidation.
Product Highlights
- Vitreous China Construction
-
The unit undergoes high-temperature firing to create a non-porous surface that resists stains and bacterial growth.
- Standardized Dimensions
-
- 150mm x 150mm face size aligns with traditional ceramic wall tiles.
- Recessed depth requires a 50mm to 65mm wall cavity for flush installation.
- Industrial Grade Glaze
-
Resistant to scratches and common bathroom acids or abrasive cleaning agents used in facility management.
Technical Specifications
| Specification | Detail |
|---|---|
| Material | Vitreous China (Ceramic) |
| Mounting Type | Recessed / In-wall |
| External Size | 150mm x 150mm |
| Finish | High-Gloss White |
| Application | Soap & Tissue Combo |
What’s Included
-
1 x Ceramic Combination Soap and Tissue Holder
-
1 x Spring-Loaded Plastic Tissue Spindle
On-Site & Workshop Notes
-
Ensure the wall cavity is prepared before tiling begins to accommodate the recessed depth of the ceramic fixture.
-
Use a high-quality polymer-modified thin-set mortar for bonding the back of the unit to the masonry substrate.
-
Check for level and plumb alignment during the setting process to match surrounding grout lines.
-
Clean off excess mortar immediately from the glazed surface to avoid permanent staining or scratching during cleanup.
Reviews
There are no reviews yet.