Standard 3/4 Inch GI Tee, Female Threaded, Galvanized Iron Pipe Fitting

3/4 Inch GI Tee

The Standard 3/4 Inch GI Tee is a high-grade malleable iron fitting engineered for branching pipe runs in pressurized water and gas distribution systems. This heavy-duty component features a hot-dip galvanized coating that ensures long-term protection against oxidation and chemical corrosion in harsh environments. It is fully compatible with DN20 galvanized piping systems commonly found in commercial and industrial plumbing installations.

Built for the Job

Contractors and plumbers rely on this T-junction for creating 90-degree branches in rigid metal piping networks. The fitting provides the mechanical strength required for surface-mounted installations where PVC or PPR might be susceptible to physical damage. It performs reliably in high-temperature applications and maintains structural integrity under significant vibration, making it a staple for pump room manifolds and industrial fluid transport.

• Mainline branching for domestic and commercial potable water supply.

• Connection point for fire sprinkler systems and standpipe installations.

• Structural framework and handrail construction in industrial settings.

Product Highlights

Corrosion Protection

The hot-dip galvanization process applies a thick zinc layer that prevents rust even when the fitting is exposed to moisture or buried in non-acidic soil.

Precision Threading

• Deep-cut female BSP threads ensure a leak-proof seal when used with quality thread sealant.
• Uniform wall thickness throughout the casting prevents cracking during high-torque tightening.
• Chamfered internal edges reduce flow turbulence and sediment buildup at the junction.

Technical Specifications

What’s Included

• 1 x 3/4 Inch Galvanized Iron Equal Tee Fitting

On-Site & Workshop Notes

• Always apply PTFE tape or plumbing paste to the male threads before joining to ensure a pressure-tight connection.

• Verify that the pipe threads are clean and free of metal shavings to prevent cross-threading during assembly.

• This iron component is designed for rigid systems; use appropriate unions nearby to allow for future maintenance or equipment replacement.

• Store these fittings in a dry area to maintain the integrity of the zinc coating before installation.