PPR 50mm Plain Pipe Roll, 1.5 Inch, 50m Coil

PPR 50mm Plain Pipe Roll

The PPR 50mm Plain Pipe roll provides a continuous 50-meter run for high-pressure water distribution in residential and commercial plumbing. This Polypropylene Random Copolymer material handles both hot and cold water cycles without scaling or corrosion. The 1.5-inch nominal diameter fits standard industrial flow requirements while maintaining high structural integrity under thermal stress.

Built for the Job

Plumbers and site supervisors select this 50-meter coil to minimize the number of joints required in long-distance trenching or riser installations. Fewer joints directly reduce the potential for leak points and lower the overall cost of fittings on a project. The material’s smooth internal bore prevents lime-scale buildup and ensures consistent flow rates over the decades-long lifespan of the system. This piping withstands high-temperature fluctuations, making it suitable for boiler connections and solar water heating loops where traditional PVC might fail. The flexibility of the coil format allows for easier navigation around site obstacles compared to rigid 4-meter lengths.

• Main water supply lines for multi-story buildings and industrial complexes.

• Hot water distribution systems for commercial kitchens and laundries.

• Underground service connections requiring minimal mechanical couplings.

Product Highlights

Thermal and Pressure Rating

Engineered for PN20 pressure ratings, maintaining stability at temperatures reaching up to 95 degrees Celsius.

Material Characteristics

• Low thermal conductivity reduces heat loss in hot water applications.
• High chemical resistance protects against acidic or alkaline water conditions.
• Acoustic insulation properties dampen water hammer and flow noise.

Technical Specifications

What’s Included

• 1 x 50-Meter Roll of 50mm PPR Plain Pipe

On-Site & Workshop Notes

• Ensure the fusion welding tool is pre-heated to the correct temperature before joining this material to fittings.

• Store the coil away from direct UV exposure for extended periods to maintain long-term polymer flexibility.

• Allow for thermal expansion loops in long horizontal runs to prevent stress on the anchor points.