Standard S-Trap Toilet, 250mm Rough-in, Dual Flush

S-Trap Toilet

The Standard S-Trap Toilet provides a reliable waste management solution for floor-outlet plumbing configurations in residential and commercial developments. This vitreous china fixture features a 250mm rough-in distance to accommodate standard slab-on-grade plumbing layouts. The dual-flush mechanism ensures water efficiency while maintaining the necessary head pressure for effective waste removal.

Built for the Job

Site supervisors and plumbers select this specific floor-mounted water closet for installations where the drainage pipe exits vertically through the floor rather than through a rear wall. The heavy-duty ceramic construction withstands high-traffic use in office blocks, apartments, and public facilities. Its high-gloss glaze prevents waste adhesion and simplifies maintenance for facility managers. The design focuses on structural integrity, ensuring the base remains stable when secured with standard floor bolts and wax rings. Contractors must verify the rough-in measurement from the finished tiled wall to the center of the waste pipe before final positioning.

• Ground floor residential bathroom installations with floor-level drainage.

• Commercial restroom upgrades requiring standard 250mm rough-in compatibility.

• New multi-story developments utilizing vertical stack plumbing designs.

Product Highlights

Vitreous China Construction

The ceramic body undergoes high-temperature firing to create a non-porous surface that resists staining and odors.

Dual-Flush Efficiency

• Full flush 6-liter capacity for heavy waste removal.
• Half flush 3-liter capacity for liquid waste to reduce site water consumption.
• Top-mounted chrome push button for easy user operation.

Technical Specifications

What’s Included

• 1 x Ceramic Toilet Bowl and Cistern Unit

• 1 x Dual-Flush Internal Valve Mechanism

• 1 x Soft-Close Toilet Seat and Cover

• 1 x Floor Fixing Bolt Kit

On-Site & Workshop Notes

• Always measure the rough-in from the finished tile surface to the center of the waste pipe to ensure the cistern sits flush against the wall.

• Ensure the floor surface is level before mounting this ceramic unit to prevent stress fractures during bolt tightening.

• Use a high-quality wax ring or rubber pan connector to create a gas-tight seal between the trap and the floor waste pipe.

• Avoid over-tightening the floor bolts as excessive torque can crack the vitreous china base.