Heavy Gauge 14G PVC Coated Chain Link Fence, 7ft x 18m, Galvanized Core

14G PVC Chain Link

The Heavy Gauge PVC Fence provides a high-tensile perimeter solution for industrial, agricultural, and high-security residential sites. This 14-gauge wire features a hot-dipped galvanized core that resists oxidation even if the outer layer sustains mechanical damage. The 7ft height serves as an effective deterrent against unauthorized access while the 18m roll length allows for efficient coverage of long boundaries with minimal joins.

Built for the Job

Contractors specify this fencing for environments where standard residential wire fails to provide sufficient rigidity or corrosion resistance. The 14-gauge thickness (approximately 2.0mm core) ensures the mesh maintains its shape under tension and resists sagging over time. Site supervisors deploy this material in coastal regions or high-humidity zones because the polymer coating acts as a primary barrier against salt spray and chemical runoff. It functions effectively for securing warehouse yards, school perimeters, and large-scale livestock enclosures where animal impact is a factor.

• Industrial site security and perimeter boundary demarcation.

• Agricultural fencing for medium-sized livestock and crop protection.

• Corrosive environment installations including coastal and industrial zones.

Product Highlights

Dual-Layer Protection

The manufacturing process bonds a UV-stabilized PVC layer over a hot-dipped galvanized steel wire substrate.

Structural Integrity

• 14-gauge wire provides superior tensile strength compared to standard 16G alternatives.
• Knuckled mesh edges prevent unravelling during the tensioning process.

Technical Specifications

What’s Included

• 1 x 18-Meter Roll of 14G PVC Coated Chain Link Fence (7ft High)

On-Site & Workshop Notes

• Maintain a maximum post spacing of 3 meters to ensure the 7ft height does not lead to wind-load instability.

• Use 12G or 10G galvanized tension wire at the top, middle, and bottom to keep the mesh taut.

• Store rolls upright on a flat surface to prevent mesh distortion before installation.

• Ensure all cut ends are treated with a zinc-rich cold galvanizing spray or PVC touch-up to prevent core corrosion.