32 Gauge Plain Sheet Roll
The Standard 32 Gauge Sheet is a continuous roll of zinc-coated steel designed for high-performance roofing accessories and general metal fabrication. This material provides a cost-effective solution for creating custom flashing, ridge caps, and valley linings on residential or commercial job sites. The light gauge ensures flexibility during manual bending without sacrificing structural integrity against environmental elements.
Built for the Job
Contractors and roofers utilize this galvanized material for site-specific detailing where pre-formed components do not meet the architectural requirements. The 50-meter length allows for long, seamless runs in valley gutters, which significantly reduces the risk of leaks at joints. Its 32-gauge thickness is specifically selected for ease of manipulation using standard tin snips and hand-folders, making it a staple for onsite technicians.
-
Fabrication of custom ridge caps and hip starters for non-standard roof pitches.
-
Installation of weather-tight flashing around chimneys and parapet walls.
-
Lining for internal box gutters and external valley drainage.
Product Highlights
- Corrosion Resistance
-
The hot-dipped zinc coating provides a sacrificial layer that protects the base steel from oxidation and moisture penetration.
- Workability Features
-
- High ductility allows for sharp 90-degree bends without surface cracking.
- Uniform thickness across the entire 50-meter run ensures consistent seam welding or riveting.
Technical Specifications
| Specification | Detail |
|---|---|
| Gauge | 32 Gauge |
| Roll Length | 50 Meters |
| Material | Galvanized Steel |
| Finish | Zinc Coated |
| Width | 914mm (Standard 3ft) |
What’s Included
-
1 x 50-Meter Roll of 32 Gauge Galvanized Plain Sheet
On-Site & Workshop Notes
-
Always wear cut-resistant gloves when handling this metal sheeting to prevent injuries from sharp edges.
-
Store the roll in a dry, covered area to prevent “white rust” caused by condensation between the tightly wound layers.
-
Use galvanized-compatible fasteners or rivets to maintain the integrity of the corrosion protection across the installation.
-
Ensure a minimum overlap of 150mm when using the material for valley linings to prevent capillary water draw.
Reviews
There are no reviews yet.