PPR 25mm PN20 Pipe 100m Roll

PPR 25mm Pipe Roll

The PPR 25mm PN20 Pipe provides a high-density polyolefin solution designed for pressurized fluid transport in demanding plumbing environments. This 100-metre coil allows for long, continuous runs that minimize the number of mechanical joints required on large-scale sites. It utilizes random copolymer polypropylene to ensure structural integrity under both high thermal loads and significant internal pressure.

Built for the Job

This piping system is the standard choice for contractors installing hot and cold potable water lines in residential and commercial buildings. The material maintains a high resistance to chemical corrosion and electrolysis, making it suitable for industrial fluid transport and compressed air systems. Plumbers prefer this format for underfloor heating circuits and manifold distributions where joint-free lengths prevent potential leak points behind finished surfaces.

• Installation of hot and cold domestic water distribution networks in high-rise developments.

• Connection of HVAC equipment and boiler systems requiring high thermal tolerance.

• Transport of pressurized air and mild chemical solutions in workshop environments.

Product Highlights

Thermal Performance

The tubing retains its mechanical strength at continuous operating temperatures of 70°C and handles short-term peaks up to 95°C.

Hydraulic Efficiency

• The smooth internal bore features a low friction coefficient of 0.007 to maximize flow rates.
• Low surface roughness prevents the accumulation of lime-scale and bacterial biofilm over time.

Technical Specifications

What’s Included

• 1 x 100 Metre Continuous Roll of 25mm PN20 PPR Pipe

On-Site & Workshop Notes

• Use a standard socket fusion welder set to 260°C for all connections to ensure a monolithic bond.

• Allow for thermal expansion in long runs by utilizing expansion loops or offsets in accordance with local building codes.

• Store the coil away from direct sunlight to prevent UV degradation before the final installation is complete.

• Verify that all cutters are sharp to ensure a square edge for proper insertion depth during the welding process.