Standard PPR 20mm 90-Degree Elbow, PN20 Pressure Rated

PPR 20mm 90-Degree Elbow

The PPR 20mm 90-Degree Elbow provides a permanent, leak-proof change in pipe direction for high-pressure water systems. This fitting consists of high-grade Polypropylene Random Copolymer. It supports both residential and commercial plumbing networks with high thermal stability. The component facilitates smooth flow transitions in restricted spaces.

Built for the Job

Plumbers rely on this fitting to navigate corners and obstacles during the installation of water distribution lines. The socket-fusion design ensures that once heated and joined, the fitting and the pipe become a single continuous material. This eliminates the weak points common in threaded or glued systems. It handles significant pressure fluctuations without fatigue. The thick-walled construction provides impact resistance on active construction sites. Site supervisors value the material for its resistance to scaling and corrosion. This ensures long-term flow efficiency in hard water areas. It remains stable under high temperatures, making it suitable for hot water return lines. The lightweight nature of the material simplifies overhead installations in large-scale facilities.

• Directional changes in potable water supply lines.

• Installation of hot water heating systems in residential buildings.

• Industrial piping for transport of non-corrosive fluids.

Product Highlights

High Pressure Tolerance

The PN20 rating ensures the component withstands operating pressures of up to 20 bar at standard temperatures.

Thermal Performance

• Maintains structural integrity at temperatures up to 95 degrees Celsius.
• Low thermal conductivity reduces heat loss in hot water applications.

Technical Specifications

What’s Included

• 1 x 20mm 90-Degree PPR Elbow fitting

On-Site & Workshop Notes

• Clean both the pipe end and the internal socket before heating to prevent joint contamination.

• Set the fusion welding machine to exactly 260 degrees Celsius for optimal material bonding.

• Avoid twisting the components during the insertion process to maintain the internal structure.

• Allow the joint to cool completely for the specified time before applying pressure to the system.

• Store these fittings away from direct sunlight to prevent long-term UV degradation before installation.