Standard 1¼ Inch PVC Waste Bend, 32mm Solvent Weld, 92.5 Degree

1¼ Inch PVC Waste Bend

The Standard PVC Waste Bend provides a critical directional change for domestic and commercial wastewater systems. This 32mm fitting accommodates standard 1.25-inch waste pipes commonly installed in bathroom basins and light-duty drainage applications. The uPVC construction resists household chemicals and maintains structural integrity under normal operating temperatures found in residential plumbing.

Built for the Job

Plumbers and facility managers utilize this component to navigate tight spaces under cabinetry or behind pedestal basins. It facilitates the transition from the trap to the main discharge stack with a swept profile that reduces the likelihood of debris buildup. The 92.5-degree angle is specifically engineered to provide a 2.5-degree fall, ensuring gravity-fed systems maintain consistent flow rates without stagnant water. The solvent weld socket design creates a permanent, fused connection that withstands the vibrations and thermal expansion cycles common in active waste lines. This fitting remains a staple for installers requiring a reliable, leak-proof solution for internal non-pressure applications.

• Directional changes in 32mm bathroom basin waste pipework.

• Connection of secondary waste lines to primary soil stacks.

• Retrofitting drainage systems in tight vanity or cupboard spaces.

Product Highlights

High-Grade uPVC Composition

The unplasticized polyvinyl chloride material ensures high impact resistance and long-term durability in concealed locations.

Solvent Weld Compatibility

• Precision-molded sockets for tight tolerance fits.
• Chemically bonds with standard PVC solvent cements for a unified joint.

Technical Specifications

What’s Included

• 1 x 32mm PVC Waste Bend (92.5 Degree)

On-Site & Workshop Notes

• Ensure the pipe end is cut square and deburred before attempting to fit this drainage component.

• Clean both the internal socket of the fitting and the external pipe surface with an appropriate pipe cleaner to remove grease and debris.

• Apply an even layer of solvent cement and insert the pipe fully, giving a slight twist to distribute the adhesive before holding in place for 30 seconds.

• Verify the 2.5-degree fall is maintained across the horizontal run to prevent sediment accumulation in the line.