HADA Gypsum Board 1200mm x 2400mm x 9mm

HADA 9mm Gypsum Board

The HADA Gypsum Board 9mm provides a high-quality internal lining solution for residential and commercial ceiling applications. This plasterboard features a compressed gypsum core encased in heavy-duty paper liners. It offers a flat, smooth surface ready for immediate decoration with paint or wallpaper once the joints are finished.

Built for the Job

Site supervisors specify this 9mm board primarily for overhead ceiling installations where weight management is critical. The reduced thickness compared to wall-grade boards makes it easier for crews to lift and secure during high-level work. It integrates seamlessly with standard galvanized steel ceiling grids or timber battening systems. This material handles easily on-site and cuts cleanly with a standard utility knife, allowing for fast fitting around light fixtures and HVAC vents.

• Installation of suspended ceilings in residential living areas and bedrooms.

• Creation of decorative bulkheads and light troughs in commercial lobbies.

• Internal lining for temporary partitions or lightweight office dividers.

Product Highlights

Tapered Edge Profile

The long edges are tapered to allow for flush jointing with fiber tape and joint filler for a seamless finish.

Optimized Core Density

• Resists sagging when installed on 400mm or 600mm center spacings.
• Provides a non-combustible core for improved fire safety in interior spaces.

Technical Specifications

What’s Included

• 1 x HADA 9mm Gypsum Board Sheet (1.2m x 2.4m)

On-Site & Workshop Notes

• Always store sheets flat on a level surface in a dry environment to prevent warping or moisture absorption.

• Use 25mm or 32mm drywall screws for fixing to metal studs or timber frames at 150mm intervals.

• Ensure the ivory side faces outward for the best painting results and adhesion of primers.

• Maintain a 3mm gap at floor level when using this panel for partitions to avoid rising damp issues.