Standard Parquet Wooden Flooring, 12mm Solid Hardwood, 300mm x 50mm Blocks

Solid Timber Flooring

The Standard Parquet Wooden Flooring is a professional-grade interior surfacing solution designed for high-traffic residential and commercial environments. This solid hardwood material provides a hard-wearing, long-lasting floor that contractors can sand and refinish multiple times over its service life. It is compatible with various subfloor types including cured concrete screeds and exterior-grade plywood underlays.

Built for the Job

Contractors and flooring specialists select these hardwood blocks for projects requiring a combination of aesthetic appeal and structural durability. The material arrives kiln-dried to a moisture content of 8-12% to ensure dimensional stability once installed in controlled indoor environments. The individual block format allows for versatile layout patterns, including traditional herringbone, brick-bond, or basketweave configurations. Because the timber is solid through its entire thickness, it offers superior impact resistance compared to thin-veneer engineered alternatives. Site supervisors should ensure the workspace remains climate-controlled throughout the installation process to prevent excessive expansion or contraction of the wood fibers.

• Installation in high-end residential living rooms and heavy-use dining areas.

• Commercial showroom flooring where a premium, durable finish is required.

• Refurbishment projects in older buildings to match historical timber styles.

Product Highlights

Material Grade

Selected solid hardwood timber processed to a high standard of grain consistency and structural integrity.

Precision Milling

• Square-edged profile for seamless butt-jointing on level subfloors
• Uniform 12mm thickness for reduced sanding time during the finishing phase

Longevity

Solid construction allows for multiple renovation cycles throughout the service life of the building.

Technical Specifications

What’s Included

• Individual hardwood parquet blocks (quantity as per order in square meters)

On-Site & Workshop Notes

• Always allow the timber to acclimatize in the specific room of installation for at least 48 to 72 hours before laying to prevent post-install gaps.

• Ensure the subfloor moisture content is below 12% using a calibrated meter to prevent adhesive failure or wood warping.

• Maintain a 10mm to 15mm expansion gap around the perimeter of the room, which can be covered by skirting boards or scotia moldings.

• Use a high-tack polyurethane flooring adhesive applied with the correct notched trowel for maximum surface contact.

• For finishing, follow a sanding sequence starting from 40-60 grit for leveling up to 120 grit for the final smooth surface before applying sealants.

people also view

• Standard MDF Plain Board 12mm 8ft x 4ft x
• 12mm Plain Plywood, 8ft x 4ft Sheet
• 18mm Marine Plywood Board, 2440mm x 1220mm, WBP Glue
• Trade 300mm Round Rainfall Shower Head, SS304 Stainless Steel, Polished Chrome
• Junon Wooden Cherry 3 Gang 2 Way Switch 10AX