GL Series Sintered Stone Matt Slab, 80x260cm, 15mm Thickness

Sintered Stone Matt Slab

The GL Sintered Stone Slab provides a high-performance surface for demanding architectural applications. This 15mm thick engineered material utilizes a high-pressure sintering process to fuse natural minerals into a dense, non-porous body. It serves as a superior alternative to natural stone for heavy-duty kitchen worktops and high-traffic commercial surfaces.

Built for the Job

Site supervisors and kitchen fitters select this large-format panel to minimize grout lines and joints in expansive installations. The 15mm profile offers the structural rigidity required for cantilevered breakfast bars and unsupported overhangs without the risk of bowing associated with thinner cladding materials. Because the material undergoes extreme thermal processing during manufacture, it remains stable in environments with significant temperature fluctuations. This makes the surface suitable for both indoor culinary spaces and outdoor kitchen units where UV exposure and weather resistance are critical factors. The matt finish reduces glare from overhead task lighting and provides a slip-resistant surface for floor transitions or wet area cladding.

• Fabrication of seamless kitchen countertops and waterfall islands.

• Installation of heavy-duty floor tiles in commercial lobbies.

• External facade cladding for weather-exposed building skins.

Product Highlights

Industrial Durability

This architectural panel achieves a high Mohs hardness rating to resist scratching from steel tools and heavy equipment.

Thermal and Chemical Stability

• Withstands direct contact with hot cookware up to 1200 degrees Celsius.
• Resists damage from acidic cleaning agents and industrial solvents.

Technical Specifications

What’s Included

• 1 x GL Series Sintered Stone Slab (80 x 260 cm)

On-Site & Workshop Notes

• Use specialized bridge saws or water-jet cutters with diamond blades designed specifically for high-density engineered stone.

• Ensure a minimum of two personnel or mechanical suction lifters are used for transport to prevent edge chipping.

• Apply high-bond epoxy or polymer-modified thin-set adhesives for secure bonding to sub-structures.

• Verify that the substrate is perfectly level within 2mm over a 3-meter span before laying this large-format material.