Crown Super Gloss
The Crown Super Gloss Paint provides a high-performance alkyd-based finish for professional contractors requiring a durable, mirror-like sheen on diverse substrates. This oil-based enamel offers superior flow and leveling properties for interior and exterior surfaces. It is engineered for long-term protection on wood, metal, and masonry components in residential and commercial environments.
Built for the Job
Site supervisors and facility managers specify this coating for high-traffic areas where standard emulsions fail to provide sufficient scrub resistance. The alkyd resin formulation ensures a hard-wearing film that resists moisture, grease, and general wear. On industrial sites, this enamel is often used for marking machinery or protecting structural steel after a suitable primer application. Painters prefer the extended open time of this formula, allowing for a smooth finish without visible brush marks on large surface areas like doors or cabinetry.
-
Coating interior timber trim, skirting boards, and window frames for a washable finish.
-
Protecting exterior metal gates, railings, and pipes against corrosion and UV.
-
Finishing kitchen and bathroom cabinets where high moisture resistance is mandatory.
Product Highlights
- High-Opacity Formulation
-
The enamel provides excellent hiding power to cover previous colors with minimal coats on prepared surfaces.
- Substrate Versatility
-
- Suitable for softwoods, hardwoods, and plywood.
- Compatible with ferrous and non-ferrous metals when used with the correct primer.
- Applicable to cured plaster and cement rendering in exterior settings.
Technical Specifications
| Specification | Detail |
|---|---|
| Volume | 4 Litres |
| Finish Type | High Gloss (Enamel) |
| Coverage Rate | 13 – 15 m² per litre per coat |
| Touch Dry Time | 4 – 6 hours (at 25°C) |
| Recoat Interval | 16 – 24 hours |
| Thinning Agent | Mineral Turpentine / White Spirit |
| Application Method | Brush, Roller, or Conventional Spray |
What’s Included
-
1 x 4 Litre Tin of Crown Super Gloss Enamel Paint
On-Site & Workshop Notes
-
Ensure all surfaces are free from oil, wax, and dust before starting the application process.
-
Apply one coat of wood primer or zinc phosphate metal primer to bare substrates for maximum adhesion.
-
Stir the contents thoroughly with a flat paddle before use to ensure uniform pigment distribution.
-
Store the container in a cool, well-ventilated area away from direct sunlight and ignition sources.
-
Clean all tools immediately after use using mineral turpentine to prevent the enamel from hardening.
Reviews
There are no reviews yet.