Yasian PVC Gutter Stop End, Pair, UV-Resistant Rainwater Fitting

Yasian Gutter Stop End

The Yasian PVC Gutter Stop provides a secure, leak-proof termination for residential and commercial rainwater collection channels. Manufactured from high-impact polyvinyl chloride, these fittings ensure water stays within the gutter profile until it reaches the designated downpipe outlet. This pair of end caps is essential for preventing water overflow from the ends of a run, protecting the building fascia boards and foundations from moisture damage.

Built for the Job

Site supervisors and roofing contractors specify this component when finishing a guttering run that does not require a return or an immediate downpipe connection. The fitting is designed to handle the hydraulic pressure of heavy rainfall without dislodging. Because these are supplied as a pair, they provide a complete solution for both the left and right extremities of a standard gutter length. The material is formulated to withstand high ambient temperatures and direct sunlight exposure common on Kenyan construction sites.

• Terminating standard rectangular or half-round PVC gutter profiles at the gable end.

• Sealing off open-ended rainwater systems in multi-level roofing designs.

• Retrofitting existing drainage systems where ends have become damaged.

Product Highlights

UV-Stabilized Compound

The PVC material contains additives that prevent brittleness and cracking caused by prolonged solar radiation.

Mechanical Fit Design

• Deep socket profile for increased surface contact with the gutter edge
• Internal ribbing to facilitate a tighter friction fit during installation
• Compatible with standard PVC solvent cements for permanent bonding

Technical Specifications

What’s Included

• 2 x Yasian Gutter Stop Ends (Left and Right Set)

On-Site & Workshop Notes

• Ensure the gutter edge is cut square and deburred before fitting the end cap to prevent gaps.

• Apply a thin bead of high-quality silicone or PVC adhesive inside the groove for a watertight seal.

• Account for thermal expansion by leaving a 2mm gap if the installation occurs during high-temperature periods.

• Regularly clear debris from the corners where the cap meets the gutter to prevent localized weight stress.