Trade Grade PVC Gutter Support Bracket, 110mm Half-Round, UV-Stabilized

PVC Gutter Support Bracket

The Trade Grade PVC Gutter Support Bracket, 110mm Half-Round, UV-Stabilized provides essential structural reinforcement for residential and commercial rainwater management systems. Manufactured from high-impact unplasticized polyvinyl chloride, this component ensures consistent alignment for 110mm diameter half-round guttering profiles. It effectively manages the significant weight of water during heavy rainfall while resisting the long-term degrading effects of direct solar exposure.

Built for the Job

This mounting hardware attaches directly to the fascia board to create a rigid cradle for the drainage run. Contractors rely on this specific hanger to prevent gutter sagging, which often leads to standing water and eventual debris buildup. The design incorporates a pre-drilled fixing point to accommodate heavy-duty wood screws, ensuring a secure bite into the timber substrate. By maintaining the correct fall or slope across the roofline, this hanger facilitates efficient water transition from the collection profile to the downpipe assembly. It handles thermal expansion and contraction cycles without compromising the grip on the main channel.

• Installation on residential fascia boards for standard 110mm rainwater systems.

• Support for perimeter drainage on industrial sheds and outbuildings.

• Retrofitting existing drainage runs to correct mid-span deflection.

Product Highlights

High-Impact PVC-U Construction

The unplasticized material offers superior rigidity and maintains its shape under heavy hydraulic loads.

Weather Resistance

• UV-stabilized compound prevents brittleness and cracking in high-heat environments.
• Corrosion-proof material remains unaffected by constant moisture or airborne pollutants.
• Smooth internal finish allows the guttering to slide during thermal expansion.

Technical Specifications

What’s Included

• 1 x 110mm PVC Gutter Support Bracket

On-Site & Workshop Notes

• Install these hangers at maximum intervals of 800mm to ensure adequate support during peak rainfall.

• Position the mounting units 150mm from each side of any union, corner, or stop-end fitting.

• Use 25mm x 5.0mm stainless steel or galvanized pan-head screws to prevent rust streaks on the fascia.

• Check the horizontal level with a string line to maintain a consistent 1:200 fall toward the outlet.