Kidani Corrugated Iron Sheet, 28 Gauge, 2.5m, Matte Finish

Kidani 28 Gauge Corrugated Sheet

The Kidani Corrugated Iron Sheet provides a high-performance roofing and walling solution for residential and commercial structures requiring a 28-gauge thickness and a non-reflective matte finish. This steel-based building material features a traditional corrugated profile designed for maximum structural rigidity and efficient water runoff. The 2.5-meter length suits standard purlin spacing in domestic housing and agricultural sheds.

Built for the Job

Contractors select this specific gauge for its balance between structural strength and manageable weight during installation. The cold-rolled steel substrate undergoes a rigorous galvanization process to prevent oxidation in humid or coastal environments. On-site, the 2.5m length reduces the need for excessive overlapping on smaller roof pitches, which minimizes material waste and potential leak points at the joints.

• Primary roofing for residential homes, schools, and light industrial warehouses.

• External wall cladding for site offices and temporary storage facilities.

• Fencing and perimeter hoarding for secure construction sites and rural properties.

Product Highlights

Advanced Matte Coating

The specialized finish resists UV degradation and prevents the high-glare reflection common with gloss sheets.

Structural Integrity

• 28-gauge thickness ensures resistance against denting from hail or falling debris.
• Deep corrugation profile increases the load-bearing capacity across wider purlin spans.

Technical Specifications

What’s Included

• 1 x Kidani 28 Gauge Corrugated Sheet (2.5 Meters)

On-Site & Workshop Notes

• Always use roofing screws with EPDM washers to maintain the watertight integrity of the matte surface.

• Install this cladding with a minimum overlap of 1.5 corrugations to prevent capillary water action during heavy rain.

• Avoid using abrasive grinders for cutting; use tin snips or nibblers to preserve the factory-applied protective coating on the edges.

• Store the material in a dry, covered area if installation is delayed to prevent moisture entrapment between stacked panels.