Standard 3mm Plain Plywood
The Standard 3mm Plain Plywood offers a reliable, lightweight solution for interior lining, cabinetry backing, and furniture production. This 2440mm x 1220mm board consists of high-quality wood veneers bonded with moisture-resistant resins. It provides essential dimensional stability for non-structural applications across residential and commercial job sites.
Built for the Job
Carpenters and furniture manufacturers utilize this thin veneer sheet primarily for components that do not require heavy load-bearing capacities. The 3mm thickness makes it highly flexible, allowing for slight curves in shopfitting or decorative paneling. Site supervisors often specify this material for temporary floor protection or as a sacrificial layer during heavy construction phases. It serves as an excellent substrate for thin veneers or laminates in high-end cabinetry work. The cross-laminated construction ensures the board resists splitting when installers drive small-gauge fasteners or staples near the edges. Contractors find the weight manageable for single-person handling, which increases efficiency during large-scale interior fit-outs.
- Cabinetry and wardrobe back panels to provide shear strength and dust protection.
- Drawer bottoms for lightweight storage units and office furniture components.
- Template making and architectural modeling for precise site measurements.
Standard 3mm Plain Plywood Product Highlights
- Surface Quality
- The face veneer features a smooth, sanded finish that accepts paints, primers, and wood glues without excessive absorption.
- Material Composition
-
- Multi-layered cross-grain construction for improved rigidity.
- Uniform thickness across the entire 8ft x 4ft surface area.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions | 2440mm x 1220mm (8ft x 4ft) |
| Thickness | 3mm |
| Grade | Interior / Plain |
| Core Material | Mixed Tropical Hardwood |
| Weight | Approx. 5.5kg – 6kg per sheet |
What’s Included
- 1 x Single Sheet of 3mm Plain Plywood (8ft x 4ft)
On-Site & Workshop Notes
- Store this board flat in a dry environment to prevent bowing or warping caused by moisture absorption.
- Use a fine-tooth saw blade when cutting to minimize breakout on the rear face of the panel.
- Allow the material to acclimate to site humidity for 48 hours before final installation in climate-controlled areas.
Reviews
There are no reviews yet.