Conta Contact Adhesive 1 Litre Solvent-Based High-Tack

Conta Contact Adhesive 1L

The Conta Contact Adhesive provides industrial-grade bonding strength for high-pressure laminates, wood veneers, and various synthetic materials. This solvent-based polychloroprene formula delivers a high initial tack necessary for vertical surfaces and overhead applications. It remains a staple in carpentry workshops and furniture assembly plants due to its reliable performance on porous and non-porous substrates.

Built for the Job

Carpenters and joiners rely on this liquid bonding agent for permanent fixtures where mechanical fastening is not feasible. The adhesive excels in bonding Formica and other laminates to particle board or plywood cores. It handles the stresses of thermal expansion and contraction without losing grip. Site supervisors often specify this material for edge banding and large-scale veneer work. It creates a moisture-resistant barrier once fully cured, protecting the internal wood core from humidity. The formula spreads evenly with a notched spreader or brush, ensuring consistent coverage across wide panels.

• Bonding decorative laminates to kitchen countertops and office desks.

• Fixing rubber stair nosing and floor transitions in commercial high-traffic areas.

• Repairing upholstery panels and leather trim in automotive or furniture restoration.

• Securing acoustic foam or insulation boards to interior partition walls.

Product Highlights

High Initial Grab

This chemical agent creates an immediate bond upon contact between two coated surfaces.

Environmental Resistance

• Resists heat up to 70 degrees Celsius after full cure
• Withstands moisture and common household cleaning chemicals
• Maintains flexibility to prevent brittle fractures during material movement

Trade Utility

The 1 Litre tin size provides sufficient volume for medium-scale cabinetry projects without excessive waste.

Technical Specifications

What’s Included

• 1 x 1 Litre Tin of Conta Contact Adhesive

On-Site & Workshop Notes

• Ensure both surfaces are clean, dry, and free from grease or dust before application.

• Apply a thin, even coat to both mating surfaces and wait for the solvent to flash off.

• Test the surface with a knuckle; if the glue does not transfer, it is ready for bonding.

• Use a J-roller or heavy pressure to eliminate air pockets and ensure full surface contact.

• Work in a well-ventilated area because of the high solvent content in this mixture.