Standard PVC 82mm Gutter Pipe, 4m Length, UV-Resistant

PVC 82mm Gutter Pipe

The Standard PVC 82mm Gutter Pipe, 4m Length, UV-Resistant provides a high-capacity solution for vertical rainwater discharge in residential and commercial building projects. Manufactured from durable unplasticized polyvinyl chloride, this component ensures efficient water flow from roof level to ground drainage systems. It integrates seamlessly with standard 112mm or 125mm guttering systems commonly used across the region.

Built for the Job

Plumbers and roofing contractors utilize this vertical conduit to manage high-volume runoff during heavy precipitation. The 4-metre length minimizes the need for intermediate couplings on standard single-story or double-story residential elevations. This reduces potential leak points and installation time. The material composition handles the high UV exposure found in equatorial climates without losing structural integrity. It remains rigid under thermal stress while allowing for standard expansion and contraction when fitted with correct bracketry. The smooth internal bore prevents the buildup of silt or organic debris, maintaining maximum hydraulic capacity throughout the service life of the building.

• Vertical rainwater discharge for residential housing and warehouses.

• Connection to underground storm water drains or rainwater harvesting tanks.

• Retrofitting existing drainage systems to improve water management efficiency.

Product Highlights

UV Stabilized uPVC Construction

The material includes specialized additives to prevent brittleness and discoloration from prolonged sun exposure.

Impact Resistance

• High wall-thickness consistency for structural rigidity
• Resists damage from ladder placement during maintenance
• Withstands typical site handling and transport stresses

Hydraulic Efficiency

The 82mm internal diameter provides optimal flow rates for medium to large roof surface areas.

Technical Specifications

What’s Included

• 1 x 4-Metre length of 82mm PVC Downpipe

On-Site & Workshop Notes

• Support the vertical run using downpipe clips at maximum 1.2-metre intervals.

• Cut this material using a fine-tooth handsaw and deburr edges to ensure smooth joints.

• Allow a 10mm expansion gap at the top of each socket to accommodate thermal movement.

• Store horizontally on a flat surface to prevent bowing before installation.