Laticrete Waterproofing Membrane 10kg
The Laticrete Waterproofing Membrane 10kg provides a high-performance, thin, load-bearing barrier designed specifically for wet area protection. This liquid-applied coating creates a seamless moisture shield under ceramic tile, stone, and brick installations. It effectively prevents water penetration in residential and commercial environments where moisture management is critical for structural integrity.
Built for the Job
Site supervisors and tilers rely on this chemical compound for its versatility across various substrates. The material bonds directly to concrete, cement mortar beds, and exterior glue plywood. It is a staple for bathroom renovations, balcony waterproofing, and kitchen floor preparation. By creating a continuous rubberized layer, the solution protects the subfloor from rot and prevents efflorescence in tile grout lines. This product handles the thermal expansion and contraction common in modern building materials without losing its seal.
- Sealing shower pans and wet room floors before thin-set application.
- Waterproofing balconies and terraces over occupied living spaces.
- Protecting laundry rooms and commercial kitchens from floor leaks.
Product Highlights
- Crack Suppression
- The elastic properties of this coating allow it to bridge hairline cracks up to 3mm, preventing substrate movement from telegraphing through to the finished tile surface.
- Rapid Curing Formula
-
- Dries to a dark olive green color to indicate readiness for flood testing.
- Allows for tile installation in as little as 2 to 4 hours under standard job-site conditions.
- Water-based composition ensures low VOC emissions and easy tool cleanup with soap and water.
Laticrete Waterproofing Membrane 1okg Technical Specifications
| Specification | Detail |
|---|---|
| Container Weight | 10 Kg |
| Coverage (2 Coats) | Approx. 10-12 m² |
| Application Tool | Roller, Brush, Trowel |
| Service Temperature | -29°C to 82°C |
| Breaking Strength | 1.7 to 2.1 MPa |
What’s Included
- 1 x 10 Kg Pail of Laticrete Waterproofing Liquid
On-Site & Workshop Notes
- Surfaces must be structurally sound, clean, and free of any bond-breaking contaminants like oil or wax before application.
- Apply two coats to ensure a pinhole-free finish, allowing the first coat to change color before applying the second layer.
- Use reinforcing fabric or mesh tape at all changes of plane, such as floor-to-wall transitions and internal corners.
- Store the container in a cool, dry place and keep the lid tightly sealed to prevent the liquid from skinning over between uses.
Reviews
There are no reviews yet.