Etimo 18mm Laminated Particle Board 8ft x 4ft

Etimo Laminated Particle Board

The Etimo 18mm Particle Board serves as a structural core material for interior furniture manufacturing and professional shopfitting applications. This 2440mm x 1220mm sheet consists of a high-density wood particle substrate bonded under high pressure with a decorative laminate finish. It provides a consistent surface and structural integrity for vertical and horizontal interior components.

Built for the Job

Contractors and furniture manufacturers select this material for its readiness to use immediately after cutting. The pre-finished surface saves significant time on-site by removing the sanding and painting stages of a build. It is the standard choice for building carcasses in residential kitchens, bedroom wardrobes, and commercial office workstations. The uniform thickness ensures that hinges and hardware fit accurately every time without the need for manual adjustment or shimming.

• Fabrication of internal shelving and storage units.

• Construction of office desks and reception counters.

• Wall paneling and decorative interior linings.

Product Highlights

Structural Core Density

The internal composition features multi-layered wood particles that provide excellent screw-holding capacity and resistance to warping.

Surface Durability

• Resistance to light surface abrasions and scratches.
• Easy-to-clean surface for high-traffic furniture.
• Uniform color and grain pattern across multiple sheets.

Technical Specifications

What’s Included

• 1 x Laminated Particle Board Sheet (18mm x 1220mm x 2440mm)

On-Site & Workshop Notes

• Always use a fine-tooth, carbide-tipped circular saw blade to ensure clean cuts without laminate blowout.

• Apply matching PVC or melamine edging tape to all exposed edges to seal the core against ambient moisture.

• Store sheets flat on a level surface with at least three evenly spaced bearers to prevent bowing.

• This material is designed for interior dry-use only and will swell if exposed to standing water.

• Ensure pilot holes are drilled before driving screws to prevent splitting the core material near edges.