Pegler 3/4 Inch Brass Valve
The Pegler 3/4 Inch Valve is a heavy-duty isolation component engineered for professional plumbing and mechanical services. This PN25 rated fitting features a robust forged brass body that handles high-pressure water distribution and heating circuits. The quarter-turn operation provides immediate flow control in residential and commercial installations.
Built for the Job
Site supervisors specify this hardware for critical branch lines and equipment isolation points. It functions reliably in plant rooms where high temperatures and pressures are common. The full-bore design ensures zero restriction to flow, which reduces pump strain and maintains system efficiency. Plumbers prefer this model for its long-term sealing performance in hard water areas. The CW617N brass grade ensures the body resists dezincification and maintains structural integrity over decades of service. The red lever handle allows for rapid identification in dark service ducts or crowded ceiling voids.
-
Main water supply isolation for residential units and apartments.
-
Flow control for commercial HVAC and hydronic heating systems.
-
Industrial compressed air and non-corrosive fluid lines.
Product Highlights
- PN25 Pressure Rating
-
This fitting withstands a maximum cold working pressure of 25 bar, making it suitable for high-rise riser mains.
- Full Bore Geometry
-
- Matches internal pipe diameter to eliminate turbulence.
- Prevents pressure drops across the valve body during high flow.
- Advanced Stem Security
-
The blow-out proof stem design ensures safety by preventing the internal assembly from ejecting under extreme system pressure.
Technical Specifications
| Specification | Detail |
|---|---|
| Thread Size | 3/4 Inch (20mm) FxF |
| Thread Standard | BSPP Parallel (ISO 228) |
| Body Material | Forged Brass (CW617N) |
| Ball Material | Chrome Plated Brass |
| Temperature Range | -10°C to +110°C |
What’s Included
-
1 x Pegler PB300 3/4 Inch Brass Ball Valve with Lever Handle
On-Site & Workshop Notes
-
Apply high-quality PTFE tape or thread sealant to the male threads before joining to this fitting.
-
Ensure the steel lever has at least 90 degrees of clearance to allow for complete shut-off during maintenance.
-
Avoid using excessive torque on the valve body to prevent stress corrosion cracking over time.
-
The chrome-plated ball resists scale buildup, making the unit suitable for hard water regions across Kenya.
Reviews
There are no reviews yet.