Standard 2-Inch PVC Waste Tee, 90-Degree uPVC Solvent Weld

Standard 2-Inch Waste Tee

The Standard 2-Inch PVC Waste Tee provides a reliable 90-degree junction for non-pressure drainage, waste, and vent (DWV) systems. Manufactured from high-grade unplasticized polyvinyl chloride, this fitting ensures a leak-proof connection when used with compatible solvent cements. It is designed for residential and commercial plumbing stacks where branch lines must integrate into a primary vertical or horizontal waste run.

Built for the Job

This component is essential for plumbers and site supervisors managing greywater or sewage discharge systems. The internal geometry is engineered to facilitate smooth fluid flow, reducing the risk of sediment buildup or blockages at the junction point. Because it uses a solvent weld connection, it creates a permanent chemical bond that resists vibration and thermal expansion found in standard building environments.

• Connecting kitchen sink waste lines to a main 50mm discharge pipe.

• Integrating bathroom basin drains into a centralized waste stack.

• Creating ventilation branches in DWV systems to maintain trap seals.

Product Highlights

Industrial Grade uPVC

The fitting is resistant to household chemicals, acids, and alkalis typically found in waste streams.

Precision Socket Fit

• Tight tolerances ensure a snug fit before applying solvent cement.
• Deep sockets provide maximum surface area for a secure chemical weld.
• Smooth internal bore minimizes friction and prevents debris snagging.

Technical Specifications

What’s Included

• 1 x 2-Inch (50mm) PVC 90-Degree Waste Tee Fitting

On-Site & Workshop Notes

• Ensure all pipe ends are cut square and deburred before attempting to fit this junction.

• Always use a high-quality PVC primer and solvent cement to ensure the joint reaches full pressure rating.

• Allow at least 24 hours for a full cure before performing a high-volume water test on the system.

• This connector is intended for gravity-fed waste systems and is not rated for pressurized water supply lines.

people also view

• Standard 2-Inch Waste Pipe, 50mm uPVC, 6m Length
• Standard 4 Inch PVC Waste Tee, 110mm, Solvent Weld, Grey
• Standard GI 2 Inch Galvanized Iron Pipe, Class B, 6m
• Standard 3/4 Inch GI Tee, Female Threaded, Galvanized Iron Pipe Fitting
• Standard 1/2" GI Tee, Galvanized Iron, BSP Threaded