Trade Grade 10mm Tempered Walk-in Shower Glass Partition, 900mm x 2000mm

10mm Tempered Shower Glass

The Walk-in Shower Glass Partition is a heavy-duty fixed panel designed for high-traffic residential and commercial wet room environments. Manufactured from 10mm toughened safety glass, this barrier meets EN 12150 standards for thermal shock and impact resistance. The minimalist design eliminates moving parts, reducing long-term maintenance requirements in facility management and hospitality settings.

Built for the Job

This glass screen is engineered for barrier-free entry systems where accessibility and durability are primary requirements. Contractors prefer fixed panels for wet rooms because they remove the failure points associated with rollers, hinges, and tracks. The 10mm glass thickness provides superior structural rigidity compared to standard 6mm or 8mm alternatives, minimizing flex when installed in wide-span configurations. It integrates seamlessly with both tiled floors and low-profile shower trays.

• Installation in commercial gyms and hotel wet rooms.

• Modern residential bathroom renovations requiring open-access entry.

• High-use facility bathrooms where mechanical hardware maintenance must be minimized.

Product Highlights

Toughened Safety Glass

The 10mm thick panel undergoes a controlled thermal tempering process to increase strength and ensure safe breakage into small granular chunks if compromised.

Corrosion-Resistant Hardware

• Anodized aluminum wall profile with 15mm adjustment for out-of-plumb walls.
• Polished stainless steel support arm for maximum structural stability.

Technical Specifications

What’s Included

• 1 x 10mm Tempered Glass Panel (900mm x 2000mm)

• 1 x Aluminum Wall U-Channel Profile

• 1 x Telescopic or Fixed Stainless Steel Support Bar

• 1 x Bottom Floor Seal and Installation Fixings

On-Site & Workshop Notes

• Always transport and store the glass vertically to prevent stress fractures or surface scratches.

• Ensure the wall profile is fixed into solid blocking or structural studs; 10mm glass is heavy and requires substantial anchoring.

• Apply a high-quality anti-fungal sanitary silicone to the external edges of the wall profile only to allow internal moisture drainage.

• Avoid any metal-to-glass contact during installation to prevent localized pressure points that can cause shattering.