PMax 2 Gang 2 Way
The PMax 2 Gang Switch integrates two independent control points into a single 86mm x 86mm plate. This configuration optimizes wall space in high-density electrical layouts. Each gang supports 2-way switching. This enables the management of a single light source from multiple locations. The unit carries a 10AX rating. This rating signifies its capability to handle inductive loads without premature contact welding. It operates reliably at 250V AC. The internal architecture utilizes high-grade copper conductors for maximum conductivity. The housing consists of flame-retardant polycarbonate. This material withstands high temperatures and resists yellowing over time. It provides high impact resistance for industrial environments. The switch mechanism delivers a positive snap-action. This reduces the time the contacts spend in a semi-conductive state. It minimizes heat buildup during operation. The design facilitates quick installation. It features clearly marked terminals for Common, L1, and L2 connections. The terminal screws remain captive within the housing. This prevents hardware loss during onsite assembly.
Key Features
-
Durable Polycarbonate Construction
The faceplate uses high-impact polycarbonate to resist mechanical stress and thermal deformation during heavy use. -
Advanced Contact Mechanism
- Silver-alloy contacts minimize electrical resistance and prevent carbon buildup.
- The toggle action provides tactile feedback for positive circuit engagement.
-
Terminal Efficiency
Large brass terminals accommodate multiple 1.5mm or 2.5mm cables for streamlined daisy-chaining in complex wiring looms. -
Inductive Load Compatibility
- The 10AX rating supports fluorescent and LED lighting drivers.
- High inrush current tolerance prevents contact sticking.
Specifications
| Feature | Specification |
|---|---|
| Current Rating | 10AX |
| Voltage | 250V AC |
| Configuration | 2 Gang 2 Way |
| Material | Polycarbonate |
| Compliance | BS EN 60669-1 |
| Mounting Centers | 60.3mm |
| Carton Quantity | 100 pcs |
What’s in the Box
-
PMax 2 Gang 2 Way Switch
-
Set of M3.5 Mounting Screws
-
Screw Cover Caps
Why Choose PMax 2 Gang 2 Way
-
The dual-circuit interface suits large-scale commercial deployments and meets the rigorous requirements of BS EN 60669-1 standards.
-
Procurement managers benefit from the high-density carton packaging which supports bulk logistics for major construction projects.
-
The mounting centers follow the standard 60.3mm spacing to ensure compatibility with all standard UK-style back boxes.
-
Matches other PMax electrical accessories to provide a uniform aesthetic across the entire facility installation.
-
Polycarbonate material provides natural UV stabilization to prevent discoloration in environments with direct sunlight exposure.
Beatrice Wanjiku (verified owner) –
The switch works well and looks decent on the wall. My only small issue was that the screws provided were a bit short for my deep mounting boxes, so I had to use my own. Otherwise, the 2-way function is smooth and it feels firm when clicking.
Eng. Kevin Omondi (verified owner) –
I’ve been using PMax accessories for a few projects now. This 10AX switch is sturdy and the internal terminals are easy to wire, unlike some cheap brands where the screws strip easily. It handles the 250V load comfortably without any heating issues. Very reliable for residential use. Will definitely be ordering more for my next site in Rongai.
Sarah Atieno (verified owner) –
The finish is quite nice and clean. Used these for my living room renovation. The 2-gang setup is convenient for controlling the main light and the balcony light from one spot. Delivery to Kisumu was also fast and the items arrived in good condition.
Josphat Mwangi (verified owner) –
Good quality switch. Fitted it in the hallway and it works perfectly for the two-way connection. No issues so far.