PMax 10A Breaker
The PMax 10A MCB functions as a primary safety component within modular electrical distribution systems. This single-pole device monitors current flow to prevent damage from thermal overloads. It utilizes a calibrated bimetallic strip for long-term overcurrent detection. The electromagnetic coil responds instantly to high-magnitude short circuits. This dual-action mechanism protects sensitive electronics and wiring infrastructure. High-grade, flame-retardant thermoplastic forms the external housing. This material resists tracking and withstands high temperatures during fault events. The front face features a clear toggle switch for manual circuit isolation. Green and red color indicators provide immediate visual confirmation of the contact status. Large tunnel terminals accommodate cables up to 25mm². These terminals use captive screws to prevent loss during installation. The design facilitates uniform heat dissipation across the breaker body. This prevents nuisance tripping in high-density panel configurations. The 10-ampere rating serves lighting circuits and small power outlets. Type C characteristics manage the inrush currents typical of LED drivers and small motors. The 6kA breaking capacity ensures the device can safely interrupt substantial fault currents. This protects the upstream supply and downstream equipment. The unit integrates seamlessly into 35mm DIN rail environments. It meets IEC 60898-1 standards for low-voltage switchgear.
Key Features
-
C-Curve Tripping Characteristic
The unit triggers between five and ten times the rated current to accommodate moderate inductive surges. -
Mechanical and Electrical Endurance
- Supports over 20,000 mechanical operations for long-term service life.
- Handles up to 10,000 electrical cycles under full load conditions.
-
DIN Rail Compatibility
Standard 35mm mounting clips allow for quick installation in modular enclosures. -
Advanced Safety Terminals
- IP20 rated housing protects against accidental finger contact.
- Serrated terminal interiors improve conductor grip and reduce resistance.
Specifications
| Feature | Specification |
|---|---|
| Rated Current | 10A |
| Number of Poles | 1P (Single Pole) |
| Tripping Curve | Type C |
| Breaking Capacity | 6kA |
| Rated Voltage | 230/400V AC |
| Standard | IEC 60898-1 |
| Terminal Capacity | Up to 25mm² |
What’s in the Box
-
1 x PMax 10A Single Pole Miniature Circuit Breaker
Why Choose PMax 10A Breaker
-
The PMax protective unit offers high-performance protection for commercial electrical panels.
-
Technical teams benefit from the standardized 17.5mm module width for precise planning of distribution board space.
-
The 6,000A interrupt rating provides a significant safety margin for branch circuit protection.
-
Procurement managers find the 180-piece carton quantity efficient for large-scale project deployments.
-
The robust mechanical linkage ensures consistent tripping across thousands of cycles even in varying ambient temperatures.
Brenda Atieno (verified owner) –
Standard 10A breaker, fits well on the DIN rail without wobbling. Delivery to Nakuru was fast. It’s a decent budget option if you want something better than the generic ones in the local hardware shops.
Evans Kiprotich (verified owner) –
The terminals are okay but you have to be careful not to over-tighten as the plastic housing feels slightly thin compared to the high-end brands. However, for a 10A circuit, it’s performing well and hasn’t given me any issues since installation last month.
Kamau Maina (verified owner) –
I bought a dozen of these for a residential project in Syokimau. The PMax 10A is quite reliable for lighting loads. Even with several LED floodlights on one circuit, the C-curve handles the start-up current just fine. No nuisance tripping so far. Happy with the build quality for this price point.
John Mutua (verified owner) –
Works as expected. Good price.