Scanford Elegance Switch
The Scanford 4-Gang Switch provides a robust solution for multi-circuit lighting management in high-traffic commercial environments. This hardware supports four independent circuits while maintaining a compact single-plate footprint. The integrated 2-way mechanism enables complex lighting configurations where control from two separate locations is necessary. High-grade internal components ensure consistent electrical conductivity across all four modules. This unit adheres to strict safety standards for low-voltage electrical accessories in residential and office infrastructures.
Key Features
-
Arc-Suppression Technology
Silver nickel alloy contact points minimize electrical arcing to extend the operational life of the internal mechanism. -
Load Compatibility
- Supports 10AX inductive loads for modern LED driver compatibility.
- Handles resistive loads up to 250V AC without thermal degradation.
- Maintains low contact resistance during high-frequency switching cycles.
-
Material Durability
The faceplate utilizes UV-stabilized polycarbonate to prevent yellowing and maintain structural integrity under varying environmental temperatures. -
Advanced Terminal Design
- Captive terminal screws prevent component loss during the wiring process.
- Large-bore cable entries accommodate up to three 1.5mm² conductors simultaneously.
- Clear laser-etched markings facilitate rapid identification of Com, L1, and L2 terminals.
Specifications
| Feature | Specification |
|---|---|
| Rated Voltage | 250V AC, 50/60Hz |
| Current Rating | 10AX (Inductive/Resistive) |
| Switching Configuration | 4-Gang, 2-Way |
| Material | Flame Retardant Polycarbonate (UL94 V-0) |
| Compliance | BS EN 60669-1 |
| Mounting Box Depth | 35mm Recommended |
| Terminal Capacity | 3 x 1.5mm² or 2 x 2.5mm² |
What’s in the Box
-
Scanford Elegance 4-Gang Module
-
Two M3.5 Fixing Screws
-
Screw Cover Caps
-
Installation Wiring Guide
Why Choose Scanford Elegance Switch
-
The quad-circuit assembly optimizes wall space by consolidating multiple toggles into a single standardized plate.
-
Internal copper alloy busbars improve heat dissipation during continuous operation of high-density lighting arrays.
-
The 2-way internal architecture provides flexibility for installers designing multi-point control systems in hallways or large rooms.
-
Additionally, the reinforced mounting frame prevents plate distortion when tightening screws against uneven wall surfaces.
-
Tactile feedback from the rocker mechanism ensures users receive physical confirmation of circuit state changes.
-
Standardized dimensions ensure compatibility with existing 86mm x 86mm electrical backboxes for straightforward retrofitting.
Kennedy Omondi (verified owner) –
Bought these for my new extension in Syokimau. The finish is actually very decent for the price, looks quite modern on the wall compared to the old bulky ones. Having 4 switches in one plate saves a lot of space in the sitting room. Only issue was the terminal screws were a bit tight out of the box, but once installed, they click very firmly. Good value.
Mercy Wanjiku (verified owner) –
Very sleek switches. Used them for an office project in Westlands and the client loves the look. Genuine Scanford quality.